Frequenzerweiterung Alinco DR-510
- Dr. Schiwago
- Santiago 8
- Beiträge: 788
- Registriert: Sa 31. Okt 2009, 18:27
- Kontaktdaten:
Frequenzerweiterung Alinco DR-510
Wer kann mir sagen wie ich den Dualbander Alinco DR-510 Frequenzerweitern kann?
`73
CB Skip: Dr. Schiwago
OP: Patrick
QRV: 15USB / 1FM
DX: 13TH972
QRV Freenet: 149.0875
Zur Ramonstergaragen Website
Das Leben ist zu kurz für QRP
CB Skip: Dr. Schiwago
OP: Patrick
QRV: 15USB / 1FM
DX: 13TH972
QRV Freenet: 149.0875
Zur Ramonstergaragen Website
Das Leben ist zu kurz für QRP
Re: Frequenzerweiterung Alinco DR-510
Bei mods.dk hab ich folgendes gefunden:
1. Pull off top cover.
2. With radio knowbs facing you look behind the VFO knob and you will will see a yellow wire laying on top of the VFO board.
3. Cut the yellow wire and tape end.
4. Replace top cover and hold down the "F" key and the VFO key at the same time, turn on the radio and release.
5. Hit the "F" & MHZ to get different receive ranges.
6. The radio will have to be re-programmed.
1. Pull off top cover.
2. With radio knowbs facing you look behind the VFO knob and you will will see a yellow wire laying on top of the VFO board.
3. Cut the yellow wire and tape end.
4. Replace top cover and hold down the "F" key and the VFO key at the same time, turn on the radio and release.
5. Hit the "F" & MHZ to get different receive ranges.
6. The radio will have to be re-programmed.
- Dr. Schiwago
- Santiago 8
- Beiträge: 788
- Registriert: Sa 31. Okt 2009, 18:27
- Kontaktdaten:
Re: Frequenzerweiterung Alinco DR-510
[quote="5363";p="231426"]Bei mods.dk hab ich folgendes gefunden:
1. Pull off top cover.
2. With radio knowbs facing you look behind the VFO knob and you will will see a yellow wire laying on top of the VFO board.
3. Cut the yellow wire and tape end.
4. Replace top cover and hold down the "F" key and the VFO key at the same time, turn on the radio and release.
5. Hit the "F" & MHZ to get different receive ranges.
6. The radio will have to be re-programmed.[/quote]
Danke HF-Doktor,
was hat sie denn dann für einen Frequenzbereich?
Konnte da nicht`s darüber finden.
1. Pull off top cover.
2. With radio knowbs facing you look behind the VFO knob and you will will see a yellow wire laying on top of the VFO board.
3. Cut the yellow wire and tape end.
4. Replace top cover and hold down the "F" key and the VFO key at the same time, turn on the radio and release.
5. Hit the "F" & MHZ to get different receive ranges.
6. The radio will have to be re-programmed.[/quote]
Danke HF-Doktor,
was hat sie denn dann für einen Frequenzbereich?
Konnte da nicht`s darüber finden.
`73
CB Skip: Dr. Schiwago
OP: Patrick
QRV: 15USB / 1FM
DX: 13TH972
QRV Freenet: 149.0875
Zur Ramonstergaragen Website
Das Leben ist zu kurz für QRP
CB Skip: Dr. Schiwago
OP: Patrick
QRV: 15USB / 1FM
DX: 13TH972
QRV Freenet: 149.0875
Zur Ramonstergaragen Website
Das Leben ist zu kurz für QRP
Re: Frequenzerweiterung Alinco DR-510
Da der Kasten nicht über einen Wideband-RX verfügt wird er wohl nur von 144 . 147.995 und von 430 - 450 MHz laufen vermute ich mal:
144.00-147.995Mhz. & 440-4450Mhz(U.S.Version)
144:00-145.9875Mhz. 8 430-440Mhz(Europe Version)
cu
144.00-147.995Mhz. & 440-4450Mhz(U.S.Version)
144:00-145.9875Mhz. 8 430-440Mhz(Europe Version)
cu
-
- Santiago 8
- Beiträge: 953
- Registriert: So 16. Nov 2008, 11:13
- Standort in der Userkarte: All over the World
Re: Frequenzerweiterung Alinco DR-510
müsste 138 - 165 MHZ 420 - 469 MHz http://www.radiomods.com/modreview.asp? ... and=Alinco
Gesendet via Siemens S6
ʎɐqǝ ıǝq ɹnʇɐʇsɐʇ ǝu ɹǝpǝıʍ ǝıu ǝɟnɐʞ ɥɔı uɐɯ ɥo
ʎɐqǝ ıǝq ɹnʇɐʇsɐʇ ǝu ɹǝpǝıʍ ǝıu ǝɟnɐʞ ɥɔı uɐɯ ɥo
Re: Frequenzerweiterung Alinco DR-510
Komischerweise findet man gerade bei der Kiste nix zum Frequenzbereich im Internet Meist ist ja angegeben wie weit der RX funktioniert und so weit geht dann nach einer Mod meist der TX-Bereich. Kommt wahrscheinlich drauf an in wie weit die PLL mitspielt respektive ab wann sie nicht mehr rastet.
- Dr. Schiwago
- Santiago 8
- Beiträge: 788
- Registriert: Sa 31. Okt 2009, 18:27
- Kontaktdaten:
Re: Frequenzerweiterung Alinco DR-510
[quote="6390";p="231652"]müsste 138 - 165 MHZ 420 - 469 MHz http://www.radiomods.com/modreview.asp? ... and=Alinco[/quote]
Hallo Funkfeuer, das hört sich schon mal gut an, aber hast du einen Login für die Mod`s auf der Seite?
Oder anders, ist das auch das Mod die der HF-Doktor gepostet hat???
Hallo Funkfeuer, das hört sich schon mal gut an, aber hast du einen Login für die Mod`s auf der Seite?
Oder anders, ist das auch das Mod die der HF-Doktor gepostet hat???
`73
CB Skip: Dr. Schiwago
OP: Patrick
QRV: 15USB / 1FM
DX: 13TH972
QRV Freenet: 149.0875
Zur Ramonstergaragen Website
Das Leben ist zu kurz für QRP
CB Skip: Dr. Schiwago
OP: Patrick
QRV: 15USB / 1FM
DX: 13TH972
QRV Freenet: 149.0875
Zur Ramonstergaragen Website
Das Leben ist zu kurz für QRP