FT 817 PTT Steuerung für HLA 150
-
- Santiago 7
- Beiträge: 690
- Registriert: Mi 2. Jan 2013, 18:22
- Standort in der Userkarte: .
FT 817 PTT Steuerung für HLA 150
Moin,
ich wollte meine HLA 150 Plus per PTT Steuerung schalten, aber der 817 hat ja leider keinen Ausgang dafür.
Die Buchse an der HLA braucht ja nur gegen Masse geschaltet werden, wäre es dann möglich, einfach am Mikrofon die PTT Schaltung dafür zu benutzen, sprich TX zu Masse am Mic?
Oder gibt es noch eine gute Alternative, dem 817 einen PTT Ausgang zu verpassen?
Gruß Alex.
ich wollte meine HLA 150 Plus per PTT Steuerung schalten, aber der 817 hat ja leider keinen Ausgang dafür.
Die Buchse an der HLA braucht ja nur gegen Masse geschaltet werden, wäre es dann möglich, einfach am Mikrofon die PTT Schaltung dafür zu benutzen, sprich TX zu Masse am Mic?
Oder gibt es noch eine gute Alternative, dem 817 einen PTT Ausgang zu verpassen?
Gruß Alex.
73 vom Breaker 1.9
- Kid_Antrim
- Santiago 9+15
- Beiträge: 1615
- Registriert: So 25. Feb 2018, 17:49
- Standort in der Userkarte: Berlin
- Wohnort: Berlin
Re: FT 817 PTT Steuerung für HLA 150
Belegung der Acc Buchse gibt es in deinem Manual. Bei Bedarf das Manual bei Wimo herunterladen.
- voltapark
- Santiago 8
- Beiträge: 900
- Registriert: Do 21. Okt 2004, 16:43
- Standort in der Userkarte: 63571 Gelnhausen
- Wohnort: 63571 Gelnhausen
Re: FT 817 PTT Steuerung für HLA 150
Die Steuerung der PA erfolgt durch Pin 2 der 8pol. Mini-DIN-Buchse CAT/LINEAR, im Handbuch auch mit ACC bezeichnet, während Pin 3 mit Masse beschaltet ist.
Quelle: https://dm2cdb.homepage.t-online.de/ft-817_pa.htm
Quelle: https://dm2cdb.homepage.t-online.de/ft-817_pa.htm
-
- Santiago 7
- Beiträge: 690
- Registriert: Mi 2. Jan 2013, 18:22
- Standort in der Userkarte: .
Re: FT 817 PTT Steuerung für HLA 150
Vielen Dank! Werde ich morgen mal so umsetzen!
Gruß Alex
Gruß Alex
73 vom Breaker 1.9
- Kid_Antrim
- Santiago 9+15
- Beiträge: 1615
- Registriert: So 25. Feb 2018, 17:49
- Standort in der Userkarte: Berlin
- Wohnort: Berlin
Re: FT 817 PTT Steuerung für HLA 150
Sage doch mal Bescheid, wie die HLA 150 so läuft und was die so maximal an Leistung macht.CbFunk-fan hat geschrieben:Vielen Dank! Werde ich morgen mal so umsetzen!
Gruß Alex
-
- Santiago 7
- Beiträge: 690
- Registriert: Mi 2. Jan 2013, 18:22
- Standort in der Userkarte: .
Re: FT 817 PTT Steuerung für HLA 150
Die läuft so ziemlich gut! Auf 10m macht sie noch bei 8w in so 100-110w out.Kid_Antrim hat geschrieben: ↑Sa 16. Feb 2019, 18:54Sage doch mal Bescheid, wie die HLA 150 so läuft und was die so maximal an Leistung macht.CbFunk-fan hat geschrieben:Vielen Dank! Werde ich morgen mal so umsetzen!
Gruß Alex
Auf SSB kann ich das leider nicht so genau sagen, aber mit Pfeifen ins Mic vom 817 auch so 110W, bei 5W Einstellung.
Beim Kollegen waren’s ca. 2,5 S-Stufen auf SSB.
Das SSB Signal ist ziemlich sauber und nicht „verbrannt“
73 vom Breaker 1.9
-
- Santiago 7
- Beiträge: 690
- Registriert: Mi 2. Jan 2013, 18:22
- Standort in der Userkarte: .
Re: FT 817 PTT Steuerung für HLA 150
Doch klar, so nutze ich die zurzeit ja.
Aber auf SSB fällt die manchmal zu schnell ab wenn ich kurz nichts sage. Und ja, SSB Delay ist eingeschaltet.
Und manchmal wird sogar die erste Silbe verschluckt, wenn man zu schnell loslegt.
73 vom Breaker 1.9
-
- Santiago 9+30
- Beiträge: 2777
- Registriert: Fr 13. Dez 2013, 22:42
- Standort in der Userkarte: Monnem
Re: FT 817 PTT Steuerung für HLA 150
Naja, dann stöhnt man eine Silbe voraus das geht schon in einen Automatismus über.CbFunk-fan hat geschrieben: ↑Sa 16. Feb 2019, 20:09 Aber auf SSB fällt die manchmal zu schnell ab wenn ich kurz nichts sage. Und ja, SSB Delay ist eingeschaltet.
Und manchmal wird sogar die erste Silbe verschluckt, wenn man zu schnell loslegt.
Ich habe die 150plus so an einem SDR-TRX und an einem 817.
Die beiden Lüfter habe ich wie bei meinen anderen Geräten standardmäßig gebändigt mit einem Micro-Lüfter-Regler
https://www.amazon.de/H-Tronic-118028-T ... B003A60A24
....73 Joe
-
- Santiago 7
- Beiträge: 690
- Registriert: Mi 2. Jan 2013, 18:22
- Standort in der Userkarte: .
Re: FT 817 PTT Steuerung für HLA 150
Also für mich ist es so nicht, die PA fällt einfach zu schnell ab.
73 vom Breaker 1.9
-
- Santiago 9+15
- Beiträge: 1754
- Registriert: Di 26. Aug 2014, 22:09
- Standort in der Userkarte: Essen
Re: FT 817 PTT Steuerung für HLA 150
Lies dir das hier mal durch:
https://funkperlen.blogspot.com/2015/02 ... luckt.html
Speziell die Antwort von RM:
"The PTT input however it is switched be it from the radio or manually switched, eg from a footswitch or similar, controls only the relay in the amp. Bias in the HLA series is only switched on when there is RF present on the input. The short delay could be the rise time of the bias, at the start of the transmission. C8 holds the bias on for a short time between gaps when there is no RF but at the start of the transmission there will always be a short delay. In order to get a quicker bias on time a possible modification would be to remove R19 from the base of Tr4 and solder a wire from the cathode of D14, this gives a bias on time of about 10uS instead of some milliseconds before the bias is on and stable. This isn’t however an official mod just something i took a look at, it doesn’t look like it would cause any major problems but i haven’t looked too deeply into it."
https://funkperlen.blogspot.com/2015/02 ... luckt.html
Speziell die Antwort von RM:
"The PTT input however it is switched be it from the radio or manually switched, eg from a footswitch or similar, controls only the relay in the amp. Bias in the HLA series is only switched on when there is RF present on the input. The short delay could be the rise time of the bias, at the start of the transmission. C8 holds the bias on for a short time between gaps when there is no RF but at the start of the transmission there will always be a short delay. In order to get a quicker bias on time a possible modification would be to remove R19 from the base of Tr4 and solder a wire from the cathode of D14, this gives a bias on time of about 10uS instead of some milliseconds before the bias is on and stable. This isn’t however an official mod just something i took a look at, it doesn’t look like it would cause any major problems but i haven’t looked too deeply into it."
-
- Santiago 9+30
- Beiträge: 2777
- Registriert: Fr 13. Dez 2013, 22:42
- Standort in der Userkarte: Monnem
Re: FT 817 PTT Steuerung für HLA 150
Interessanter Tipp, da ich seit 19 Jahren kein CW mehr mache, ist mir das noch nicht aufgefallen